Dynojet 424xLC2: Installation Guide - Manual (Page 56)

C H A P T E R 3
Cable Routing
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
3-14
K - 76950568 CAN control cable connects the eddy current brake driver to the
DynoWare RT
L - 76950569 IR temp sensor cable connects the temp sensor to the eddy current brake
driver
M - 76950574 load cell cable connects the load cell to the eddy current brake
driver
N - 76952008 4WD power supply with cable connects the 4WD board to the 4WD power cable (B)
O - 76953004 dyno movement pendant cable connects to the 4WD board
P - air hose connects the air can on the stationary dyno to your
clean dry shop air (customer supplied)
Q - rail brake air hose connects the air can on the 4WD dyno to the T fitting
on the stationary dyno air can
R - drum brake air hose connects the drum brake air can on the 4WD dyno to
the drum brake air can on the stationary
cable brief routing description
C