Interior-sealing-wet-glz – Oldcastle BuildingEnvelope Reliance StormMax User Manual
Page 31
28
R E L I A N C E S T O R M M A X I N S T A L L A T I O N M A N U A L
3.6 a. Clean all silicone surfaces and joints with 50% isopropyl alcohol and wipe clean.
b. Apply painter's tape to the mullion and glass as shown in
FIGURE 3.6
c. Apply Dow Corning 995 structural silicone sealant into pocket between the mullion and
the glass starting from the bottom and work towards the top. Be sure to use positive
pressure to completely fill the pocket and prevent voids in sealant.
d. Use a proper implement to tool the silicone sealant smooth immediately after running the bead.
e. Remove painter's tape after tooling and before silicone sealant skins over.
HW-500 Horizontal
FG-5185 Spacer Gasket
With Dow Corning 995
WW-110 Face Cap
WW-162
Pressure
Plate
FS-325 Fastener
GP-107 Isolator
GP-117 Gasket
GP-117 Gasket
Painter's Tape
FIGURE 3.6
Glazing Instructions
9/16" Glazing Similar
5/16" Weep Hole
INTERIOR SEALING FOR WET GLAZED APPLICATIONS