SINGER 9980 QUANTUM STYLIST - Manual (Page 46)

46
ii. ELONGATION
Some patterns may be elongated up to 2 times
the original length. You may elongate the
pattern by pressing the function button (F5)
directly under the elongation icon.
a. Regular length
b. Elongated
3. After these settings, press the return button
(F1). LCD will indicate previous mode. (Stitch
information mode)
C. SETTING STITCH WIDTH AND LENGTH
Machine will set the stitch width and length
suitable for the pattern.
1. You can make changes by pressing the
function button (F4) directly under the width and
length mark.
2. LCD will change to show the stitch width and
length.
For narrower width, press function button F2 (–).
For wider width, press function button F3 (+).
For shorter length, press function button F4 (–).
For longer length, press function button F5 (+).
Pre-set stitch width and length will be indicated as
a highlighted number.
When you press the return button (F1), LCD will
indicate previous mode (Stitch Information mode).
B-ii
C
F5
a. For straight stitch patterns (No. 1, 2, 3, 4, 6, 8),
Stitch width buttons will change the needle
position.
To shift the needle to the left, press function button
F2.
To shift the needle to the right, press funtion
button F3.
Note: When further width or length adjustments
are not possible, machine will emit multiple audible
beeps.
If the width, length or number icons are not
indicated, the pattern cannot be changed.
Adjustments to the patterns may be made while
sewing.