Eyelet – SINGER 9980 QUANTUM STYLIST User Manual

Page 74

Advertising
background image

74

10.Fold the fabric and stitch along the seams on

each side, just a needle width from the original
stitching line. Remove the basting.

c. Wrong side of fabric

11.Fold the fabric along the buttonhole end and

stitch triangular ends on the original stitching
line.

12.Press and trim the patch to within 5 mm (3/16”)

of the stitching.

a. Right side of fabric
c. Wrong side of fabric

NOTE:
When sewing weaker fabric, reinforce buttonhole
area. Cut a patch of fusible interfacing 3 cm
(1 1/4”) wider and 2 cm (3/4”) longer than the
buttonhole. Fuse to wrong side over each
buttonhole marking.

EYELET

This stitch pattern is used for making belt holes
and other similar applications.

101 Eyelet

Satin Foot (B)

You can choose 3 sizes of eyelets by changing the
stitch length.

1. Place the fabric under the presser foot and

lower the presser foot. Start the machine.
Machine will sew the eyelet and stop
automatically.

2. Press the thread cutter button and raise the

presser foot.

3. Make a hole in the center of the eyelet.

Note:
Eyelet punch is not provided with this machine.

Advertising