SINGER 9980 QUANTUM STYLIST - Manual (Page 64)

64
INSERTING ZIPPERS
CENTERED INSERTION
No. 1 Straight Stitch (Center Needle Position)
Zipper Foot (E)
CAUTION: To prevent accidents.
Zipper foot should be used for sewing center
needle position straight stitch No. 1 only. It is
possible that needle could hit the presser foot and
break when sewing other patterns.
1. Baste the zipper opening to the seam line.
a: Straight stitch
b: End of opening
c: Basting
d: Wrong side of fabric
2. Press open the seam allowance.
Place the open zipper face down on the seam
allowance with the teeth against the seam line.
Baste the zipper tape.
3. Attach the zipper foot.
Attach the left side of the presser foot pin to the
presser foot holder when sewing the right side
of the zipper, and right side of the presser foot
pin to the holder when sewing the left side of
the zipper.
4. Sewing on the right side of the fabric, stitch the
left side of the zipper from bottom to top.
5. Stitch across the lower end and right side of
zipper.
Remove the basting and press.
5 mm
7-10 mm
7-10
mm