SINGER 9980 QUANTUM STYLIST - Manual (Page 62)

62
CRAZY PATCH
Create interesting surface embellishment by
sewing decorative stitches over the seams. Try
mixing several types of fabrics for even more
variety.
No. 1
APPLIQUE
No. 23, 24
Open Toe Foot
CAUTION: To prevent accidents.
Do not change the stitch width to wider than 5.0.
Otherwise, needle could hit the presser foot and
break.
1. Set the applique in place on the base fabric with
temporary fabric spray adhesive or by using
fusible web.
2. Sew with the right side of the stitch following the
right edge of the applique as closely as
possible.
When sewing sharp angles or curves
Bring needle to lowest position and raise the
presser foot.
Use needle as pivot and turn fabric.
Note: Applique can also be done with a satin stitch
using the Satin Foot (p. 56). It may be helpful to
place a fabric stabilizer underneath your work,
which may help prevent any fabric puckering.
General Purpose or Satin Foot (A, B)
1. Place two pieces of fabric right sides together
and sew a long straight stitch.
2. Press the seam open.
No. 19, 20
3. With the right side of the fabric facing up, sew
the decorative stitch, making sure the stitches
fall on both sides of the seam.