SINGER 9980 QUANTUM STYLIST - Manual (Page 96)

96
H.SEWING THE SELECTED PATTERNS
a. Single sewing
You can combine the tack stitch by selecting
the pattern No. 35.
When you combined the tack stitch or letter
stitch at the end of pattern, machine will stop
automatically after sewing selected patterns.
b. Repeat sewing
The pattern combination will sew repeatedly
without combining the tack stitch at the end of
the pattern sequence.
SEWING
1. Attach the Satin Foot when sewing decorative &
letter stitch.
2. Machine will start sewing from highlighted
pattern. You must shift the cursor to the pattern
where you wish to start sewing.
(When the “I” mark cursor is indicated on the
right side of selected patterns, machine will
start from first pattern.)
3. Lower the presser foot and start sewing.
Machine will indicate the sewing pattern on the
top left side of LCD.
I. TO SEW PATTERN FROM BEGINNING
a. When you stop sewing at the middle of selected
patterns, LCD will indicate the setting of sewing
pattern and the arrow mark “
“ on the
second line.
This mark is meaning that sewing is interrupted.
You can continue sewing by starting the
machine again.
b. When you stopped sewing at the middle of
selected patterns, and If you have raised the
presser foot lifter, the arrow mark will change to
“
“,
At this time, when you start sewing again,
machine will sew from the beginning of
interrupted pattern.
c. If you want to sew from the beginning of all
patterns, shift the cursor by using the cursor
buttons. (Arrow icon will disappear)