SINGER 14T967DC-WORKBOOK QUANTUMLOCK User Manual
5. Continue to thread points 4-8. Slip the thread into the rear slot of the
thread guide . Go over the take up lever . Continue by slipping the
thread into the right slot of the thread guides and .
8. Before threading the eye of the needle, make sure the thread is
behind the thread guide located on the bottom of the needle clamp.
9. Draw about 4 inches of the thread through the needle eye towards the back
of the machine.
10. Place the thread to the back, under the Presser Foot.
Three-Thread Overlock (narrow) page 13