SINGER 14T967DC-WORKBOOK QUANTUMLOCK User Manual
Install the Seam Guide Plate. The Seam Guide Plate provides a flat surface for the
fabric and seam guides. It can only be used when the knife and the lower looper
are disengaged. The Seam Guide Plate is used when sewing the Chainstitch,
Cover Stitch and the Triple Cover Stitch.
1. Open looper cover.
2. Remove Knife Cover by pulling it slightly
3. Slide the Seam Guide Plate into place.
Disengage Upper Looper. By disengaging the Upper Looper, the looper no longer
moves when sewing. It is nonoperative. If the looper was still engaged, it would hit
the Seam Guide Plate.
1. Turn handwheel until the Upper Looper is in the
2. Push the clutch button to the left and up to
Upper Looper Disengaged
Double Chain Stitch page 5