Welch Allyn Vital Signs Monitor - User Manual - Manual (Page 17)

Vital Signs Monitor 11
Unpacking Checklist
After you have unpacked the Welch Allyn Vital Signs Monitor and the components, identify each
item with the checklist that follows and inspect for missing items. Retain the shipping materials in
the event of shipping damage or for return, if necessary, to Welch Allyn/Tycos for repair or warranty
service.
All Welch Allyn Vital Signs Monitors include the following components (A-G):
A. Welch Allyn Vital Signs Monitor
This device is a portable, light weight device designed to automatically measure and display
blood pressure and pulse rate. Options available include pulse oximetry, temperature and inte-
grated printer.
B. Operator Manual (This manual)
To achieve satisfactory results, the operator should read this manual thoroughly before attempt-
ing to use the monitor. Save this manual for helpful product reference.
C. Instrument Warranty Card
Fill this out today and return to Welch Allyn. This card validates your warranty.
D. Blood Pressure Cuffs
Includes one (1) Adult and one (1) Large Adult blood pressure cuff.
NOTE: A full range of cuff sizes are available (as accessory items) however, the Large Adult
cuff will fit the majority of adults and give the most accurate blood pressure
measurement.
E. Blood Pressure Hose
With connector, connects a variety of blood pressure cuffs to the monitor.
F. AC Power Transformer and Line Cord
Operates the monitor and charges the internal battery.
G. Cuff Clip
Attaches to the rear of the monitor to hold the blood pressure cuff. Not used if mobile stand,
pole mount or wall mount accessories are purchased.
Certain Welch Allyn Vital Signs Monitors will include the following items, based on the options
purchased:
Printer Option
H. Box of Printer Paper
Six (6) rolls of thermal printer paper. One additional roll will be pre-loaded into the printer.
Pulse Oximetry (SpO
2
) Option
I. Finger Clip SpO2 Sensor and Cord
Other sensors are available separately.