Welch Allyn Vital Signs Monitor - User Manual - Manual (Page 22)

16 Vital Signs Monitor
I. Printer Feed Button
Pressing this button advances the paper in the printer.
J. Mounting Keyholes
Mounting accessories are attached via these keyholes.
K. Battery Compartment
Contains the internal battery. Removal of 4 screws allows changing battery without affecting
other internal parts.
Set-Up Procedure
AC Power Connection
The Welch Allyn Vital Signs Monitor may be powered by either AC power or battery power after the
battery has been charged.
To install the AC power transformer, insert the round transformer connector into the power port on
the side of the Monitor as shown. Insert the connector into the port until it is fully seated. Insert the
line cord into the line connector on the transformer.
To power the Welch Allyn Vital Signs Monitor, plug the line cord into the AC mains power source.
Inserting the AC power transformer connector into the Monitor port.