Sensor accuracy grid, Mechanical specifications – Welch Allyn Vital Signs Monitor - User Manual User Manual
Page 74
68
Vital Signs Monitor
Sensor Accuracy Grid
* The accuracy specification under motion conditions is + 3. For a definition of motion, contact Nell-
cor Technical Services or your local Nellcor representative.
**The accuracy specification has been determined between saturations of 80% - 99%.
Accuracy Specifications: Accuracy specifications are based on controlled hypoxia studies with
healthy, non-smoking adult volunteers over the specified saturation SpO
2
range. Pulse oximeter
SpO
2
readings were compared to SaO
2
values of drawn blood samples measured by hemoximetry.
All accuracies are expressed as + “X” digits. This variation equals + one standard deviation (+ 1 SD),
which encompasses 68% of the population.
Mechanical Specifications
Dimensions
Height
6.5 inches
(16.5cm)
Length
8.6 inches
(21.8cm)
Depth
5.0 inches
(12.7cm)
Weight
Approximately 6 pounds (2.8Kg)
Sensor Models
SpO
2
Range
70% - 99%
OXIMAX Sensor Models Single Patient Use
MAX-A,* MAX-AL*
+ 2
MAX-P*
+ 2
MAX-I*
+ 2
MAX-R**
+ 3.5
OxiCliq Sensor Models Single Patient Use
OxiCliq A
+ 2.5
OxiCliq P
+ 2.5
Reusable Sensor Models
D-YS (Infant to Adult)
+ 3
D-YS & D-YSE
+ 3.5
DS-100A
+ 3
OXI-A/N (Adult)
+ 3
OXI-P/I
+ 3