MK Diamond MK-101-24 - Manual (Page 31)

31
To extend the life of the MK-101-24, the following procedure should be performed after each use.
Lubricate all points listed below with light oils such as, 3 in 1, WD-40, etc.
(A)
Check and adjust V-belt
tension following first 48 hours of
operation (See V-belt Inspection).
(A)
Lubricate the Guide Bar.
(B)
Lubricate the Roller
Wheel Assembly.
Ensure the saw is off and disconnected before performing any maintenance. CAUTION
MK-101-24 MAINTENANCE
MAINTENANCE
Maintenance Following Use
Perform the following after initial purchase and operation of the MK-101-24.