MK Diamond MK-101-24 - Manual (Page 37)

37
(A)
Check for Smoothness
or “Glazing” (Dress blade
if needed).
(B)
Check for proper blade rotation.
(C)
Ensure the Blade Core
is not bent.
(D)
Verify the blade is correct for
the material being used.
(A)
Check the Guide Bar and
Frame for cleanliness –
clean if dirty.
(B)
Check the Movable Cutting
Table Roller Wheels for wear –
replace if necessary.
MK-101-24 TROUBLESHOOTING
Blade will not cut properly
Movable Cutting Table Does Not Move Correctly