Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular User Manual
Page 127
Advertising
3-8
(a)
Firmly grasp the headmount and remove the old
browpad.
(b)
Gently press on the new browpad. Lightly smooth
out any wrinkles in the new browpad.
(2)
Neck Pad Reinstallation. During operation of the
goggles, it is possible for the neck pad to become separated from
its position on the headband. Perform the following procedure to
reinstall the neck pad.
(a)
Lift the upper strap retention tab (see Figure 3-1)
allowing the neck pad strap to be inserted underneath.
(b)
Slip the neck pad strap all the way under the upper
strap retention tab and then pull the lower part of the neck pad
strap under the lower strap retention tab.
(c)
Repeat steps (a) and (b) for the other side of the
headband and neck pad if necessary.
Advertising
This manual is related to the following products: