Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular - Manual (Page 38)

2-3
Table 2-1. Goggles Controls and Indicators.
CONTROLS AND
INDICATORS FUNCTIONS
Power Switch Controls goggles and IR source, ON or
OFF.
RESET/OFF – Same as System
OFF. Also resets
goggles after
automatic shut off or
highlight cutoff.
ON – Goggles activated.
Do not use excessive force to place the power
switch into the momentary IR position.
NOTE
Some goggles contain an additional momentary IR
function. For momentary IR, continue to turn the
power switch clockwise; past ON and without
pulling. The power switch will return to the ON
position when released.
IR/PULL – Pull power switch
out and turn
clockwise to activate
goggles and IR
source.
CAUTION