Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular - Manual (Page 82)

2-47
2-14 INSTALLATION OF HEADMOUNT WITH
PROTECTIVE MASK
(1) Place protective mask on your head per the instructions
provided with the protective mask.
When installing the headmount over the protective
mask, be careful not to break the protective mask
seal around your face.
(2) Install the headmount per the instructions in paragraph
2-13.
NOTE
It may be necessary to remove the browpad
(Figure 2-13) when wearing the headmount over a
protective mask.
2-15 INSTALLATION OF HEADMOUNT WITH HELMET
Install the headmount per the instructions in paragraph 2-13. The
helmet is worn over the headmount.
WARNING