Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular - Manual (Page 97)

2-62
Figure 2-25. Helmet Mount.
NOTE
Place the strap in the carrying case – it is not used
for this mounting method.
(4) Find the screw located in the front center of the helmet.
Using a flat tip screwdriver, remove the screw. Hook the helmet
mount bracket on the front of the helmet and center it over the hole
where the screw was removed.
(5) Insert the screw removed in step 4 above through the
hole in the helmet mount bracket and through the helmet (see
Figure 2-25).