Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular - Manual (Page 42)

2-7
c. Explanation of Table Entries.
(1) Item Number Column. Numbers in this column are for
reference. When completing Equipment Inspection and
Maintenance Worksheet, include the item number for the
check/service indicating a fault. Item numbers also appear in the
order that you must do checks and services for the intervals listed.
(2) Interval Column. This column tells you when you must
do the procedure in the procedure column. BEFORE procedures
must be done before you operate or use the equipment for its
intended mission. DURING procedures must be done during the
time you are operating the equipment for its intended mission.
AFTER procedures must be done immediately after you have
operated or used the equipment.
(3) Location, Check/Service Column. This column
provides the location and the item to be checked or serviced. The
item location is underlined.
(4) Procedure Column. This column gives the procedure
you must do to check or service the item listed in the
Check/Service column to know if the equipment is ready or
available for its intended mission or for operation. You must do the
procedure at the time stated in the interval column.
(5) Not Fully Mission Capable If: Column. Information in
this column tells you what faults will keep your equipment from
being capable of performing its primary mission. If you make
check and service procedures that show faults listed in this
column, do not operate the equipment. Follow standard operating
procedures for maintaining the equipment or reporting equipment
failure.