Leica Geosystems SKI-Pro - Manual (Page 10)

Installation 10 Getting Started with SKI-Pro-2.5en
Installation
Installing SKI-Pro is a simple process. This brief chapter
explains everything you need to know regarding installa-
tion.
System requirements:
The computer and system software you intend to use with
SKI-Pro must meet the following minimum requirements.
Note that SKI-Pro works best with the recommended
requirements.
The operating system must be one of the following:
Windows 98, Windows 2000, Windows NT 4.0 (or later),
Windows ME or Windows XP.
Internet Explorer 4.0 or higher is required.
Minimum Hardware requirements:
• PC with Pentium processor 133 Mhz
• 32 MB RAM
• 100 MB free space on harddisk (for typical
installation)
• RS232 COM port
• Parallel Port (for software protection key)
• CD-ROM drive
• Mouse installed
Recommended Hardware requirements:
• PC with Pentium processor 500 Mhz or faster
• 128 MB RAM
• 300 MB free space on harddisk
• RS232 COM port
• Parallel Port (for software protection key)
• CD-ROM drive
• Mouse installed
Before you install:
Ensure that your computer and software conform to at
least the minimum requirements as outlined above.
SKI-Pro requires at least 100 MB of free disk space. The
programs on the installation CD are compressed and will
be expanded during installation.