Leica Geosystems SKI-Pro - Manual (Page 70)

Quick Tour IV - GIS/CAD Export 70 Getting Started with SKI-Pro-2.5en
Open the Project RT Sample, then click on the Points
tab to display local grid coordinates.
The following list should be displayed:
From the Export menu select GIS/CAD...
or
Click on from the Toolbar.
If you start the GIS/CAD Export with no Project open the
program will prompt you to select a Project from the list
before showing the following dialog:
Under Save as type select AutoCAD Files (*.dxf;
*.dwg).
We now have to create a new Lookup Table. A
LookupTable enables you to match thematical codes used
in the field with blocks in the DXF-header file. Thus every
thematical code can be matched with the required symbol
in your CAD/GIS package.
Quick Tour IV - GIS/ CAD Export, continued