Leica Geosystems SKI-Pro - Manual (Page 35)

Quick Tour I - Real Time 35 Getting Started with SKI-Pro-2.5en
The display should now look as follows:
The Point symbols indicate, that the point class is
already Measured, as the points were measured in real
time in the field. For some points (e.g. BM1) the point
symbol indicates, that the point class is Averaged,
because these points have been occupied twice. For
these two solutions a weighted average is automatically
computed.
Right-click on point BM1 and select Properties. Alterna-
tively you can also double-click on the point symbol.
If the point is not within the zooming extents, you can use
the scroll-to point combobox and
the Edit Point toolbar button.
Click the Mean tab in the property sheet.
The following Property page displays the two solutions
and their differences to the weighted average:
Drag the horizontal scroll bar to the right to display more
information.
Click OK or Cancel to exit the property sheet.
Lesson Two – Exploring the View/Edit Component, continued