Leica Geosystems SKI-Pro - Manual (Page 54)

Quick Tour II - Post-Processing 54 Getting Started with SKI-Pro-2.5en
The Wizard Step 4 appears:
Click on Finish to close the Wizard.
If you want to import coordinate files of the
same type again you can enter a Mask Name
and then use this Mask as a Template the next
time you import an ASCII file.
You can now assign the points to either a Project or a
Coordinate Set. Since these are our control points for the
determination of the transformation parameters we will
assign them to a Coordinate Set.
Right-click on Coordinate Sets and select New.
The following Property-Sheet appears:
Enter the Coordinate Set Name e.g. PP Sample local.
Select the Coordinate System PP Sample from the list.
Click on OK to confirm.
Lesson Four - Importing an ASCII File, continued