Leica Geosystems SKI-Pro - Manual (Page 44)

Quick Tour II - Post-Processing 44 Getting Started with SKI-Pro-2.5en
The Point Property Sheet appears:
Change the Point Class to Control.
Change the Coordinates to the values below:
Latitude: 47 ° 23’ 45.92367 N
Longitude: 9 ° 38’ 10.58353 E
Height: 429.279 m
Click OK to confirm.
The Point Symbol of point B215 indicates that the point
class is now Control.
You are now ready to switch to the GPS-Processing View
and select the baselines to be processed.
Click the GPS-proc tab at the bottom of the window.
The following View displays a list of all observation inter-
vals and a graphical representation of the observation
time for each interval:
Lesson Two - Processing Baselines, continued