Leica Geosystems SKI-Pro - Manual (Page 56)

Quick Tour II - Post-Processing 56 Getting Started with SKI-Pro-2.5en
In this Lesson you will learn how to use the Datum/Map
tool to calculate the transformation parameters.
In order to be able to calculate Transformation parameters
we need two sets of coordinates. The first set will be the
coordinates of our Project PP Sample in the WGS84
coordinate system. The second set will be the imported
local coordinates from the Coordinate Set PP Sample
local.
From the Tools menu click Datum/Map.
or
from the Tools List Bar or Toolbar click Datum and
Map.
Lesson Five - Calculating Transformation Parameters
The following view appears:
In the upper Tree-View open the Projects folder and
select PP Sample.
In the lower Tree-View open the Coordinate Sets folder
and select PP Sample local.
Click on the Match tab to continue.