Leica Geosystems SKI-Pro - Manual (Page 32)

Quick Tour I - Real Time 32 Getting Started with SKI-Pro-2.5en
Back in the Assign dialogue click the Settings tab.
Here you can select the coordinate system, that has been
used in the field to be imported into the SKI-Pro Coordi-
nate System Management. Additionally the Coordinate
System will be automatically attached to the project to
which you assign the data.
Make sure both options are checked as indicated
above.
Alternatively you can also attach any other
coordinate system to the project later.
Click the Fieldbook tab to create a fieldbook report.
Select Coordinate Type Local and Grid as shown
above.
Click Preview… to view the report.
Lesson One - Starting a Project and Importing Raw Data, continued