Leica Geosystems SKI-Pro - Manual (Page 37)

Quick Tour I - Real Time 37 Getting Started with SKI-Pro-2.5en
The following Property page appears:
Change Coord. Class to Main. The coordinate triplets of
the highest class will be exported.
Use the browser to select the file
…\Shared\Templates\Format Manager\Sample.frt.
Depending where you installed SKI-Pro the
path for the sample file may vary slightly. By
default SKI-Pro will be installed in:
C:\Program Files\Leica Geosystems\...
To continue, click on the Coordinate System tab.
Make sure the Coordinate System Sample RT is
selected. By default the coordinate system attached to the
current project is already selected.
Click on OK to close the Settings property page,
and finally,
Click Save to write the file to the harddisk.
Lesson Three - Exporting Coordinates to a Custom ASCII File, continued