Leica Geosystems SKI-Pro - Manual (Page 41)

Quick Tour II - Post-Processing 41 Getting Started with SKI-Pro-2.5en
The following dialog appears:
Under Files of type: select GPS500 raw data.
Under Look in: select the directory that contains the
sample data: ...\SkiPro\Data\SampleData\Sys500\Static
Check Include subfolders: all GPS500 raw data in
the two sub-directories data1 and data2 will be imported in
one run.
Depending where you installed SKI-Pro the
path for the sample data may vary slightly. By
default SKI-Pro will be installed in:
C:\Program Files\Leica Geosystems\...
Click Import.
The following Property Sheet appears:
This is where you can view and modify the raw data. e.g.
to change instrument heights or point id’s.
As you have not yet created a Project the list of Projects is
empty and you can not select an existing Project.
Right-click on Projects and select New.
Lesson One - Starting a Project and Importing Raw Data, continued