Leica Geosystems SKI-Pro - Manual (Page 57)

Quick Tour II - Post-Processing 57 Getting Started with SKI-Pro-2.5en
The following view appears:
To configure the Transformation type:
Right-click on the background in one of the views and
select Configuration or use the Toolbar button .
Under Transformation select Classical 3D and confirm
with OK.
The Classical 3D is the transformation type
that should normally be used when the local
Ellipsoid and the Map Projection is known. However SKI-
Pro supports a variety of different transformation types.
Please refer to the On-line Help for more information.
You can select the common points of system A and
system B by selecting them manually or by using the Auto
Match command:
Right-click on the background in one of the views and
select Auto Match.
Click the Results tab to continue.
The transformation parameters are instantly calculated.
Lesson Five - Calculating Transformation Parameters, continued