Leica Geosystems SKI-Pro - Manual (Page 17)

An Overview of SKI-Pro 17 Getting Started with SKI-Pro-2.5en
Antenna Management
The Antenna Management allows you to define and edit
parameters for different GPS antennas. This information
is stored in a global database and can be used to upload
to the Sensor or in a Project for GPS-Processing. All
Leica antennas are pre-defined upon installing the soft-
ware and the user is not permitted to make any changes
to these pre-defined antennas.
Codelist Management
A Codelist contains Thematical or Free Coding informa-
tion that may be assigned to points during measurement
in the field. A Codelist may be attached to a Project.
The Codelist Manager enables you to create and edit
Codelists for later use in the field.
Sensor Transfer
The Sensor Transfer component allows you to download
and upload data from the sensor.
Data can be downloaded or uploaded by a serial cable or
directly on to a PCMCIA memory card.
The following data may by downloaded from a sensor:
• GPS Raw Data
• Report files
• ASCII files
• Format Files
• Codelists
• Coordinate System Parameters
• Geoid Model field files
• Antenna definitions
• Configuration Sets
The following data may by uploaded to a sensor:
• Point information
• Coordinate System Parameters
• ASCII files
• Format Files
• Codelists
• Geoid Model field files/ CSCS Model field files
• Antenna definitions
• Configuration Sets
• Language Versions
• Firmware
SKI-Pro components, continued