Panasonic KX-F2781AL - Manual (Page 20)

Transmitting documents
Documents you can send
Minimum size Maximum size Effective scanning area Document weight
4 mm
Scanned
clipei
Single sheet:
45 to 90 g/m2(12to 24 lb.
Multiple sheets:
60 to 75 g/m2(16to 20 lb.
216 mm
(8V2")
208 mm ( 8 ^ 16 ")
m ........
Paper width
216 mm ( 8 V 2 ")
Note:
• Remove clips, staples or other similar fastening objects.
• Check that ink, paste or correction fluid has dried.
• Do not send the following types of documents. Use copies for fax transmission.
—Chemically treated paper such as carbon or carbonless duplicating paper
— Electrostatically charged paper
— Heavily curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)
Open the document feeder tray.
Loading documents
1
2
Document feeder tray
3
4
Insert the documents FACE DOWN until a beep
tone is heard.
•The unit can accept up to 15 sheets of paper at a
time.
Adjust the document guides to the width of the
document.
Press fRESOLUTION) repeatedly to the desired
setting.
STANDARD
FINE
SUPER FINE
HALF TONE
For printed or
typewritten originals
with normal-sized
characters.
For originals with small
printing.
For originals with
minute printing.
For originals containing
photographs, shaded
drawings, eto.
Note:
• Using the fine, super fine or half tone setting
will increase transmission time.
• If the resolution setting is changed during
feeding, it will be effective from the next
sheet.
•The super fine resolution only works with
other compatible machines.
20