Panasonic KX-F2781AL - Manual (Page 37)

Voice contact
(talking to the caller during or after fax reception or
transmission)
You can have a conversation with the same call after the fax message is completed. This will save the extra
expense and time of making another call.
This feature works only when the other party’s unit is equipped with a voice contact feature.
Initiating voice contact
1
Press [SP-PHONE] while transmitting or receiving
documents.
VOICE STANDBY
•Your unit will call the other party with a distinctive
ring.
When the other party answers, the unit will emit a
distinctive ring.
Press (SP-PHONE] or lift the handset to start
talking.
• If you initiate voice contact during transmission,
you can talk after all the documents have been
transmitted.
• If you initiate voice contact during reception, you
can talk after the current page of the document is
received.
Receiving a request for voice contact
If the other party initiates voice contact, your unit will emit a distinctive ring after transmission or reception is
completed.
When the distinctive ring is heard, press [SP-PHONE] or lift the handset, then start speaking.
Note:
• If you do not answer within 10 seconds of hearing the distinctive ring, the line will be disconnected.
But if your model is KX-F2781 and the ANS/FAX mode is used, the answering system will automatically
answer the line and record the incoming voice message.
37