For common message transfer, For mailbox 1 message transfer, For mailbox 2 message transfer – Panasonic KX-F2781AL User Manual
Page 54: For mailbox 3 message transfer, Press start/copy/set, A: if you selected “message” in step 4, Press istart/copy/s^fl, Press menu, Note, Setting the message transfer/pager call
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the message transfer/pager call
1
Press f
menu
!
SYSTEM SET UP
For common message transfer,
press then [^.
COMMON MSG TRNSF
For mailbox 1 message transfer,
press then 0 Q.
BOXI MSG TRNSF
For mailbox 2 message transfer,
press [#], then (T] (T|.
BOX2 MSG TRNSF
For mailbox 3 message transfer,
press then [¿]
BOX3 MSG TRNSF
3
4
5
6
Press START/COPY/SET .
MODE=OFF
i A V :
Press or to select the desired setting.
MESSAGE: transfers incoming messages.
PAGER:
calls your pager.
OFF:
turns off this feature.
Press START/COPY/SET .
NO.=
a: If you selected “MESSAGE” in step 4:
Enter the number where the message is to be
transferred.
b: If you selected “PAGER” in step 4:
Enter your pager phone number.
7
8
If necessary, press [REDIAL/PAUSEj twice.
Contact your pager company regarding the
proper pause time.
If your pager has the ability to display phone
numbers, enter the number that you wish to
appear on the display.
Press if required by your pager company.
•You may enter a total of 46 digits and/or
pauses.
Press iSTARt/COPY/S^fl.
Press MENU .
Note:
•This feature can be turned on/off remotely from a
touch tone phone (see page 59).
54