Panasonic KX-F2781AL - Manual (Page 34)

storing phone numbers for automatic dialing^
The unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your most
frequently dialed numbers.
One-touch dialing: The unit is equipped with 5 direct call station keys, each of which is divided into an upper
station and a lower station.
Speed dialing: The unit is equipped with 50 additional dialing stations. These stations are assigned to
2-digit numbers (00-49).
1 Press (MENU) until the following message is
displayed.
STORE TEL NO.
3
4
5
6
7
a: Programming for one-touch dialing:
For upper stations (1-5)
Press one of the direct call station keys.
For lower stations (6-10)
Press (LOWER], then press one of the direct
call station keys.
b: Programming for speed dialing:
Press [^, then press the desired 2-digit number
(00-49).
Enter the phone number up to 30 digits in length.
•To enter a hyphen in a phone number, press
f LOWER],
Press f^ARf/COPY/SET].
NAME =
Enter the station name, up to 10 characters, by
following the instructions on page 13.
Press (START/COPY/SETl
•To program other stations, repeat steps 2 to 6.
Press (STOP).
Helpful hint:
•To confirm stored phone numbers and station
names, print a telephone number list (see
page 69).
To keep whole or part of the
phone number secret
Press (SECRET] (direct call station 3) before and
after the number you wish to keep secret.
•The phone number will not appear on the display
and on the telephone number list.
• Pressing (SECRET] once counts as two digits.
To erase a stored number and
station name
Press (STOP] in step 3 to clear the phone number.
Press (DELETE) (direct call station 5) repeatedly
in step 5 until all of the characters are erased.
Then, press (START/COPY/SET).
34