Sending documents overseas, Note, Changing the iogo print position – Panasonic KX-F2781AL User Manual
Page 41: Changing the logo print position
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending documents overseas
You may experience difficulty in transmitting documents overseas. This feature will make sending documents
easier as the transmission speed is slowed down. Before starting the transmission procedure, follow the steps
below.
Press MENU .
>
SYSTEM SET UP
n Press 0, then 0 0.
OVERSEAS MODE
Q Press fSTART/COPY/SETl.
MODE = OFF
[ A T ]
ji Press ®) or (®) to select “ON”.
MODE=ON
[ A T ]
Dial keypad
0(X)CX)
® CE> ®
C D ® ®
® ® ®
CID dZD CrZ>
[START/COPY/SET]
• If this feature is not required, select “OFF”.
5
6
Press [START/COPY/S^.
Note:
•After transmission, this feature will be
turned off automatically.
Press MENU .
Changing the iogo print position
The logo, telephone number, date, time and page number will be printed on the transmitted document from
your unit in the following manner.
OUT: Outside of the transmitted document’s paper size (pre-selected setting).
IN:
Inside of the transmitted document’s paper size.
1
2
3
4
5
6
Press [MENJJ].
Press then 0.
SYSTEM SET UP
Dial keypad
LOGO POSITION
Press fSTART/COPY/SET].
MODE=OUT
[ A T :
Press ®) or to select the desired setting.
Press (START/COPY/SET].
Press MENU .
41