During playback, Repeating a message, Skipping a message – Panasonic KX-F2781AL User Manual
Page 58: Note, Example of the voice guide, Erasing incoming messages from memory, Erasing a specific message from memory, Erasing aii messages from a specific memory, Other remote operations, Monitoring the room sound
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
During playback
Repeating a message
Press IjJ to play the current message.
—If you press 0 within 5 seconds of playback, the previous message will be played.
Skipping a message
Press ¡y) to play back the next message.
Note:
• If you hear the voice guide after playing back the
messages, memory is full. Erase some or all of the
messages.
Example of the voice guide;
Not enough recording time. Please erase
unnecessary messages.
Erasing incoming messages from memory
Erasing a specific message from memory
Press when the message you want to erase is
played.
Example of the voice guide:
-A long beep and the voice guide will be heard,
The message has been erased.
Then the unit will continue with the next message.
Erasing aii messages from a specific memory
You can erase all of the recorded messages from common and each mailbox memory.
To erase all of the messages in a mailbox, you must first select a mailbox.
Press @ [s] when you want to erase the messages
in a specific memory.
—A long beep and the voice guide will be heard.
Example of the voice guide:
All messages have been erased.
Other remote operations
Monitoring the room sound
You can monitor the sound in the room where the unit is installed.
Press during the remote operation.
—You can monitor the sound for about 30 seconds.
Note:
•After 30 seconds are up, a beep sounds. To continue monitoring, press 0 again within 10 seconds.
58