Panasonic KX-F2781AL - Manual (Page 59)

Recording a marker message
After playing back the recorded messages, you can leave an additional message.
Example of the voice guide:
1. Wait for the voice guide indicating the end of the
remote operation.
2. Wait about 10 seconds.
3. Hear the voice guide.
4. Leave a message.
All messages have been played.
Please leave your name and message
after the beep.
Re-recording a greeting message
You can change the contents of the greeting messages for the ANS/FAX mode and mailbox memories.
To re-record a mailbox greeting message, you must first select a mailbox.
1. Press 0 to start recording during the remote operation.
•A long beep will sound.
2. Speak up to 16 seconds.
• If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from
step 1 within 10 seconds.
3. When finished, press
•The new greeting message will be played.
Turning message transfer/pager call on or off
You can remotely turn on or off message transfer/pager call for incoming messages. You must program a
transfer phone number or a pager number in advance (see page 54).
Press Q to turn ON message transfer/pager call
during the remote operation.
Example of the voice guide:
Message transfer is set.
Transfer phone number is 123456769.
or
Pager call is set.
Pager number is 098765432.
Press 0 jT) to turn OFF message transfer/pager
call.
—If a transfer phone number or a pager number is
not programmed, the voice guide will be played.
You cannot turn this feature on.
Skipping the greeting message
You can skip the greeting message.
Press during the greeting message playback,
—The unit will skip the rest of the greeting message.
Message transfer is off.
or
Pager call is off.
Transfer phone number is not set.
or
Pager number is not set.
59