Recording your own greeting messages, Kx-f2781 only), Suggested messages – Panasonic KX-F2781AL User Manual
Page 60: Recording a greeting message, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording your own greeting messages
(KX-F2781 only)
You can record your own greeting messages. The recording time is limited to 16 seconds tor each message.
Record a greeting message within 12 seconds for optimum performance.
•As for the ANS/FAX greeting message, you can choose 16 seconds or 60 seconds of recording time (see
page 63),
Suggested messages
ANS/FAX greeting message
“This is (your name, business and/or telephone number). We are unable to
answer right now. To send a fax, start transmission. To leave a message,
speak after a long beep. Thank you. ’’
TEL/FAX greeting message
“This is (your name, business and/or telephone number). Please wait for
someone to answer your call. To send a fax, start transmission.”
Mailbox 1 greeting message
Mailbox 2 greeting message
Mailbox 3 greeting message
“This is (personal name). Please leave your name and message after the
beep."
Message transfer greeting
“This is a transferred message from (your name, business and/or telephone
number). Please enter your remote ID (mailbox 1-3 password) for remote
operation. ”
Note:
• If you do not record your own greeting messages, the pre-recorded greeting messages will be played.
Recording a greeting message---------------------------------------
1
2
Open the station key panel.
Station key panel
Press (
select
] until the following is displayed.
■ For the ANS/FAX greeting:
ANS-GREETING
For the TEL/FAX greeting:
TEL-GREETING
For mailbox 1-3 greeting:
Example: Mailbox 2
BOX2-GREETING
For message transfer greeting:
TRNS-GREETING
Microphone fyOLUME
REC
3
4
Press [REC].
•A long beep will sound.
Speak clearly 30 cm (12 inches) away from the
microphone.
•The display will show the elapsed recording time.
Example: ANS/FAX greeting
ISTOPÌ
ANS REC.
02s
5
60
When finished, press [STOP].
•The unit will repeat your message. Adjust the
volume using [VOLUME].
Note:
• If you make a mistake while recording,
repeat from step 2.