Setting the recording time alert (kx-f27si only), Note, Setting the recording time alert – Panasonic KX-F2781AL User Manual
Page 63: Only), F278
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press [MENU).
Setting the recording time alert
(
kx
-
f
27
si
only) =
With this feature, when the remaining time to record incoming messages becomes less than 60 seconds, the
unit will alert the user with a slow beep.
1
2
3
4
SYSTEM SET UP
Press then ^ [^.
REC. TIME ALERT
Press fSTART/COPY/SET).
MODE=OFF
[ A T ]
Press ['•‘ J or [^^'j to select “ON”.
MODE=ON
[ A T ]
• If this feature is not required, select “OFF”.
Press [ST^T
c
O^SET)
5
0 Press [MENTTi.
Changing the recording time for the ANS/FAX
greeting message
(
kx
-F278
i
only) -
---------
You can choose 16 seconds or 60 seconds of recording time.
Press [MENU].
1
2
3
4
5
6
SYSTEM SET UP
Press then fil W.
GREETING TIME
Press fSTART/COPY/SETl,
MODE=16s
[ A T ]
Press or [j^ to select the desired setting.
Press START/COPY/SET).
Press [MENU).
Note:
• If you change the greeting message time to 60 seconds, we recommend that you inform the caller in the
ANS/FAX greeting message to press ** before starting fax transmission.
• If you change the greeting message time to 16 seconds from 60 seconds, your ANS/FAX greeting message
is deleted. Re-record a greeting message (see page 60).
63