360 Systems DigiCart/EX - Manual (Page 111)

Configuring Windows with Hanewin NFS Server
Windows 7 does not have any option for native NFS service, but there is a package available from
Hanewin that does the job nicely. It is also possible to use it with older Windows versions such as
Vista and XP. It is very easy to set up, and does not require any programming of Windows
permissions.
Hanewin is available on the Web at http://www.hanewin.net. It will run for an evaluation period so
that you can try it at no charge, and the license is inexpensive.
Install Hanewin per the instructions for your operating system. The instructions presented here are
specific to Windows 7, but the configuration values are the same for any version of Windows.
Start by creating one or more folders that you will use as Net Drives (see page 97). Next, install and
configure the Hanewin software.
You must have administrator rights to configure the software, and you
must run it as the administrator. (Right Click the NFS Server icon and
select Run as Administrator.)
Configure the NFS and Server tabs as shown.
Number of UDP NFS Server Threads should be 4, this controls how many DigiCart/EX units can
record on each share. 4 is the maximum for other reasons, if you need to make more than 4
recordings at once then use different net drives for some units.
Networking
• 99