Play digital format, Play hot keys using, Play restart mode – 360 Systems DigiCart/EX User Manual

Page 35: Play sample rate

Advertising
background image

P

LAY

D

IGITAL

F

ORMAT

• PROFESSIONAL

FORMAT

• CONSUMER

FORMAT

The DigiCart/EX can output audio on all output connectors simultaneously. The digital outputs can
output data in one of two selected formats. The PLAY DIGITAL FORMAT menu sets the format of
the digital audio at the outputs.
The Professional Format setting will provide an AES/EBU signal at the XLR-3M digital output
connector, and an AES/SMPTE 75 ohm signal at the BNC digital output connector.
The Consumer Format setting will provide an IEC-958 Type II signal at the BNC connector. The XLR
outputs should not be used when the CONSUMER output is selected.
Recordings are not copyright protected when output in the consumer format.

P

LAY

H

OT

K

EYS

U

SING

• LOCAL

ASSIGNMENTS

• NET DRV ASSIGNMENTS

As a new feature in DigiCart/EX, Hot Key assignments can be stored and recalled in two ways, either
Network Drive or Local. The PLAY HOT KEYS USING parameter controls the default behavior for
Hot Key assignment lists.
If this parameter is set to “Net Drive”, DigiCart/EX will use the Hot Key list on the currently selected
network drive. While set to play Hot Keys from a network drive, if the current drive selection is
changed to a local drive, the Local Hot Keys list will automatically become active.
If the PLAY HOT KEYS USING parameter is set to “Local Assignments”, the Local Hot Keys list will
always be used, regardless of the current drive.

P

LAY

R

ESTART

M

ODE

• ON

COMPLETION

• IMMEDIATE

While one cut or Playlist is playing, you can choose other selections for playback. Restart Mode
determines whether DigiCart/EX will discontinue playback of the current Cut and begin playback of
the next selected Cut immediately when PLAY (or a HotKey) is pressed, or wait until the current
selection has completed.

P

LAY

S

AMPLE

R

ATE

• AS

RECORDED

• OUTPUT AT 44100

• OUTPUT AT 48000

• OUTPUT AT 88200

• OUTPUT AT 96000

• CONVERT TO REFIN

• CONVERT TO DIGIN BNC

• CONVERT TO DIGIN XLR

This menu item sets the sample frequency and sync reference source for digital outputs. The “As
Recorded” setting will play any file using its recorded sample rate during play out.

27BSetup and Utility Menus

23

Advertising