Record time limit, Set aux protocol, Set contrast – 360 Systems DigiCart/EX User Manual

Page 39: Set headphone level, Set input monitor, Set ip address

Advertising
background image

R

ECORD

T

IME

L

IMIT

• NONE

• 30

SEC

• 1

MIN

• 5

MIN

• 30

MIN

• 60

MIN

Enhances the management of available Disk space of DigiCart/EX and accelerates entry to the Record
Ready condition when set to smaller values. Furthermore, you can start a recording and walk away
knowing that after the specified time limit (setting +5%), the unit will stop recording.

S

ET

A

UX

P

ROTOCOL

• ES-BUS

• PERIPHERAL-BUS

(GV)

• PERIPHERAL-BUS

(SONY)

Defines the serial protocol for the AUX serial port on the rear panel. See Appendix B for Serial
Protocol documentation.

S

ET

C

ONTRAST

• 0 to 100

Adjusts the LCD contrast. Select a value that works best for your viewing angle and lighting
conditions.

S

ET

H

EADPHONE

L

EVEL

• 0 to 64 (1 db per step)

Adjusts the volume for the ¼” headphone jack on the front panel. Select a value.
The Headphone level can also be set by pressing the Setup button during playback. Press Setup
again to keep the new setting and return to the normal playback display.

S

ET

I

NPUT

M

ONITOR

• OFF
• ON

or DISABLED BY D-NET

Allows you to monitor audio that has been processed through the digital audio circuitry.
Digital monitoring cannot be accomplished if the D-NET receiver is enabled. The message,
“Disabled by D-Net” will appear to advise you that the input monitor cannot be turned on.
NOTE: DigiCart/EX provides "pass through" A/D - D/A audio when the REC button is pressed.
Therefore, most operations may be accomplished with the INPUT MONITOR: OFF.

S

ET

IP

A

DDRESS

• AUTOMATIC

• 192.168.1.16 – 31, 192.168.2.16-31

DigiCart/EX can automatically set its IP address using network DHCP services. If running on a
network without DCHP service, the IP address can be set manually. One of thirty-two addresses can

27BSetup and Utility Menus

27

Advertising