360 Systems DigiCart/EX - Manual (Page 33)

26BFile Organization and Navigation
• 21
typing only as much of their name as makes them unique. For example: If there is a cut named
"BOSTON" and another named "BOND", BOS <ENTER> will find the first and BON <ENTER>
will find the other. This search progresses from the currently selected cut, so if there is more than
one cut with the same or similar names, subsequent FIND operations will find each one in turn.
NOTE: For cuts in other directories, use the full four-number Identifier. “S” indicates the Playlist
Directory. For cuts on other drives, use the full five-number Identifier.
The " . " (decimal) separator is not needed with the FIND function.
Find can be used in the process of creating a Quickstack. Please see Playlists on page 47.
U SING THE FIND F UNCTION WITH A K EYBOARD
Press the keyboard’s Find function key. The display will show a blinking cursor on the top line.
Begin typing your search name or file ID. Use the S key when finding I.D. Numbers in the Stack
(Playlist) Directory. Press
ENTER
to make the selected cut or Playlist current.
Information on the bottom line of the command display pertains to the currently selected cut.
Note: SCROLL LOCK enables the keyboard to play Hot Keys. Be certain that SCROLL
LOCK is OFF when using the keyboard for Find or other functions, otherwise a Hot Key
may be accidentally triggered.
U SING THE FIND F UNCTION WITH AN RC-320
Begin typing your search file ID on the gray number keys on the RC-320 keypad. The numeric
keypad on the RC-series remotes automatically assumes that you are beginning a new file ID
search. The information on the bottom line pertains to the currently selected cut.
Press
ENTER
to select the cut when the correct selection is found. The screen will display
information about the newly selected cut.
Press
PLAY
to play the cut or enter it into a Playlist (see Quickstack in Creating a Playlist on
page 49). Repeat as necessary for Follow-On Play.
The RC-320 STACK DIR Key
Find Playlist (Stack) operations on the RC-320 are expedited by use of the
STACK DIR
key.
Instead of using the remote’s navigation arrows to move to the Playlist Directory, you may
quickly select a Playlist on any mounted drive by pressing the
STACK DIR
key on the remote.
The top line of the display will prompt you to “FIND STACK:”. Enter four digits – the first digit
represents the drive number, the next three digits indicate the file ID number. Press
ENTER
to
make that Playlist current. The screen will show information about the newly selected Playlist.
Press
PLAY
to play the Playlist or enter it into a Compound Playlist. Repeat as necessary for
Follow-On Play.