View list button, Loop button, Pause button – 360 Systems DigiCart/EX User Manual

Page 25: Bank select and hot key buttons

Advertising
background image

VIEW

LIST

B

UTTON

The

VIEW LIST

button will immediately display the contents of a Quickstack or Playlist.

VIEW LIST

is

a toggle button that illuminates when active. The displayed list is scrollable.

VIEW LIST

can be used

only when there is a current list to view. If there is no current list, the button will not respond.

LOOP

B

UTTON

Press the

LOOP

button to cause the current cut (or current cut in the queue or Playlist) to continue to

cycle until the loop is disabled. Looping can only be activated during Play. The

LOOP

button will

illuminate and the

PLAY

button will flash to indicate Looping.

To disable a loop, press

LOOP

again or press

STOP

. The

LOOP

button indicator will turn off, and the

current cut will finish playing, but will not continue to loop. Press

STOP

a second time to

immediately stop playback of the current cut.
To disable a loop that was enabled while playing a Quickstack or Playlist:

• Press

LOOP

again. The

LOOP

button indicator will turn off, the current cut will finish playing,

and the Quickstack or Playlist will continue playing.

OR
• Press

STOP

once. The

LOOP

button indicator will turn off, the current cut will finish playing,

and playback will stop at the end. (Quickstacks will be deleted).Pressing

STOP

a second time

will immediately stop playback

PAUSE

B

UTTON

The

PAUSE

button is used to:

1. Pause playback. The button illuminates when active. Press

PAUSE

again to disengage it

and playback will resume from the paused position.

2. Pause recordings. The button illuminates when active. Press

PAUSE

again to disengage

it and recording will resume from the paused position. Note that Pause during Record
does not work when using digital input.

3. In Stop mode,

PAUSE

is used to build a Quickstack or Playlist.

B

ANK

S

ELECT AND

H

OT

K

EY

B

UTTONS

DigiCart/EX has four Hot Key buttons on its front panel (labeled 1 through 4), which can be used to
trigger playout of a pre-assigned cut or Playlist. Any cut or Playlist can be assigned to any Hot Key.
Hot Keys allow any cut to be played on command by a single key press.
Whenever an assigned Hot Key is pressed, the corresponding Cut is selected and played at once. (If
PLAY RESTART MODE is set to ON COMPLETION, the Cut will be played after any playing Cut and
any other Cuts that are waiting to play.) A Hot Key will interrupt any other operation.
Hot Keys can be triggered from an RC-series remote control, a keyboard, or the DigiCart/EX front
panel. The front panel buttons are arranged into two banks that can be switched by pressing the

BANK SELECT

button. In this way, up to eight Hot Keys can be set up for play from the front panel.

The button toggles between the two banks, and illuminates when bank B is active.

24BControl Panel

13

Advertising