360 Systems DigiCart/EX - Manual (Page 48)

Select COPY EDITED from the UTILITY MENU. The procedures are the same as for copying a
directory using COPY ORIGINAL with the addition of the FILE FORMAT CONVERT option.
If the FILE FORMAT CONVERT option is enabled, only linear 16-bit files with sample rates up to
48000 samples/sec will be converted. All others are copied in their original format.
D ELETE
DELETE permanently erases the currently selected cut, Playlist, directory or drive.
• Select the directory, cut or Playlist to be erased. Press
UTILITY
and select DELETE.
• Confirm the command by pressing
ENTER
, or abandon it by pressing
EXIT
.
Multiple copies of the same file each have a unique file ID number in DigiCart. Make sure that the
ID and name appearing in the top line of the display is what you intend to erase. A copied cut,
directory, or Playlist will have a different ID and will not be erased.
R ENAME
In addition to the ID numbers automatically provided by DigiCart/EX, each local drive, directory, cut
or Playlist may have its own name containing up to 15 characters. Letters, numbers, spaces and
hyphens are allowed. Network drives cannot be renamed from DigiCart.
• Select the drive, directory, cut or Playlist to be renamed.
• Press the
UTILITY
button and select RENAME.
• Use an attached a keyboard or turn the selection knob to choose a letter or number.
When using the selection knob the navigation arrow buttons move to the next character.
Using the arrow buttons on either the keyboard or the front panel before making any
entry allows the existing name to be edited.
• Confirm the new name by pressing
ENTER
, or press
EXIT
to abandon the name change.
F ORMAT D ISK
The Format Disk utility is used to prepare disk drives or memory cards for use in DigiCart/EX.
Format Disk works only on local disks, not on networked disks. Memory cards must be formatted
before they can be used with DigiCart/EX.
The internal hard disk used in DigiCart/EX is factory formatted as one logical disk, but you may
choose to re-format it with up to five partitions. The advantage of this is that there will be ten
directories and 10,000 Cut Indexes possible per partition; it does not increase the total recording
time available. Note that this choice should be made before initial use. If you want to keep the
demo cuts copy them to a memory card. If you choose to create more than two partitions, this will
reduce the number of Network Drives that can be mounted. For example, by creating four
partitions, the internal hard drive will occupy drive numbers 1,2,3 and 4, leaving only 5 and 6 to
mount Network Drives. See Allocation of Logical Drives below.
Use care during format operations. Formatting is an irreversible process and destroys all previous
data on the disk or memory card. Also note that when formatting the internal disk, all logical drive
partitions on that disk will be formatted at the same time.
36
• 27BSetup and Utility Menus