360 Systems DigiCart/EX - Manual (Page 113)

Go to the DigiCart/EX. Follow the directions on mounting a Network Drive.
Configuring Windows Firewall for Hanewin
As the system is designed for use on a private trusted network there should be no need for the
firewall, however it can be configured to allow access to the Hanewin program’s services.
- Go to Control Panel>System and Security> Windows Firewall > Advanced Settings.
- Select Inbound Rules > New Rule. Select Port. Click Next.
- Select TCP and in Specific Local Ports enter numbers 1058, 111, 2049. Click Next.
- In When Does This Rule Apply, uncheck Public. Click Next.
- Name the rule, for example “Hanewin TCP port exceptions”. Click Next.
- Again, select Rules > New Rule. Select Port.
- This time select UDP. In Specific Local Ports enter the same port numbers
1058, 111, 2049. Click Next.
- In When Does This Rule Apply, uncheck Public. Click Next.
- Name the rule, for example “Hanewin TCP port exceptions”. Click Next.
Note that in When Does This Rule Apply, the Private, Domain and Public check boxes refer to the
type of network as set in the security settings for the Network Interface. With this setting you must
select either Home or Work network, not Public.
Networking
• 101