Set sort order, Set time display, Utility menu features – 360 Systems DigiCart/EX User Manual
Page 41: Assign hot key (preset)
S
ET
R
EMOTE
C
ONTROL
• INACTIVE
• ADDRESS
(01-32)
When set to INACTIVE, DigiCart/EX can be taken “off-line” from the remote control bus and will not
respond to remote commands. To activate remote control, select an ADDRESS (1 - 32) to establish
communication with one of 360 Systems’ RC-series remote controls, an automation system that uses
the DigiCart serial protocol, or a Peripheral Bus (also called P-Bus or E-MEMS) serial connection.
Addresses 1 to 4 correspond to the four machine control buttons on a 360 Systems RC-320 remote
control. See Appendix B for DigiCart ES-Bus or P-Bus Serial Protocol documentation.
S
ET
S
ORT
O
RDER
• BY
INDEX
• BY
NAME
Selects the display sort order of cuts or stacks listed on the LCD display.
S
ET
T
IME
D
ISPLAY
• ELAPSED
TIME
• TIME
REMAINING
Determines whether the counter will display time as ELAPSED (count up) or REMAINING (count
down) during play or edit operations.
Utility Menu Features
The UTILITY MENU is used to manage Hot Keys, rename Drives, Directories, Playlists or Cuts; and
how to copy them to different directories and drives. Also explained are procedures for formatting
memory cards.
A
SSIGN
H
OT
K
EY
(P
RESET
)
This utility allows assignment of a cut or Linear Playlist to a Hot Key on DigiCart/EX, an RC-series
Remote Control, or to the letter keys of an alphanumeric keyboard. When assigned, the selection
will play immediately with a keystroke. Hot Keys may only be assigned to cuts on hard disk drives
(not memory cards), but may be on either the local drive, or a network drive.
Hot Key assignments created on network drives are available from any DigiCart/EX on the network.
For example, make a standard set of Hot Keys for all the edit studios working on the same
production, or make a personal Hot Key list that can be accessed in any studio.
• Hot Keys are subject to the currently selected RESTART MODE. (i.e. IMMEDIATE or ON
COMPLETION).
• Contents of a directory may be mass assigned to Hot Keys by entering the UTILITY MENU'S ASSIGN
HOT KEY from the directory level.
• The alphanumeric keyboard's Scroll Lock must be ON to assign or play Hot Keys from the keyboard.
Scroll Lock may be ON or OFF to CLEAR HOT KEYS.
• It is not necessary to clear a Hot Key before reassigning it.
27BSetup and Utility Menus
• 29