FRITSCH ANALYSETTE 3 PRO - Manual (Page 11)

The amplitude of the ANALYSETTE 3 SPARTAN is set manually with the
Plus and Minus key on the control panel and viewed on the lid.
2.3 Obligations of the operator
Before using the the ANALYSETTE 3, this manual is to be carefully read
and understood. The use of the the ANALYSETTE 3 requires technical
knowledge; only commercial use is permitted.
The operating personnel must be familiar with the content of the oper-
ating manual. For this reason, it is very important that these persons
actually receive the present operating manual. Ensure that the operating
manual is always near the device.
The the ANALYSETTE 3 may exclusively be used within the scope of appli-
cations set down in this manual and within the framework of guidelines
put forth in this manual. In case of non-compliance or improper use, the
customer assumes full liability for the functional capability of the ANALY-
SETTE 3 and for any damage or injury arising from failure to fulfil this
obligation.
By using the the ANALYSETTE 3 the customer agrees with this and recog-
nizes that defects, malfunctions or errors cannot be completely
excluded. To prevent risk of damage to persons or property or of other
direct or indirect damage, resulting from this or other causes, the cus-
tomer must implement sufficient and comprehensive safety measures
for working with the the ANALYSETTE 3.
Neither compliance with this manual nor the conditions and methods
used during installation, operation, use and maintenance of the the ANA-
LYSETTE 3 can be monitored by Fritsch GmbH. Improper execution of the
installation can result in property damage and thus endanger persons.
Therefore, we assume absolutely no responsibility or liability for loss,
damage or costs that result from errors at installation, improper opera-
tion or improper use or improper maintenance or are in any way con-
nected to these.
The applicable accident prevention guidelines must be complied with.
Generally applicable legal and other obligatory regulations regarding
environmental protection must be observed.
2.4 Information on hazards and symbols used in this manual
Safety information in this manual is designated by symbols. Safety infor-
mation is introduced by keywords that express the extent of the hazard.
DANGER!
This symbol and keyword combination points out a directly
hazardous situation that can result in death or serious
injury if not avoided.
Safety information
Safety information and use
- 11 -