FRITSCH ANALYSETTE 3 PRO - Manual (Page 44)

9 Maintenance
DANGER!
Mains voltage
– Before beginning with maintenance work, unplug the
mains plug and protect the device against being unin-
tentionally switched back on again!
– Indicate maintenance work with warning signs.
– Maintenance work may only be performed by special-
ised personnel.
– Put safety equipment back into operation after mainte-
nance or repair work.
We recommend keeping a safety logbook Ä Chapter 14
‘Safety logbook’ on page 51, where all work (maintenance,
repairs......) performed on the device is entered.
– The most important element of maintenance is regular
cleaning:
– When cleaning the complete device, adhere to the
guidelines of the Accident Prevention Regulation (BGV
A3) ‐ especially if the device has been set up in a dusty
environment or if the processed source material pro‐
duces dust.
9.1 Maintenance of the TorqueMaster clamping device
The clamping unit is largely maintenance-free. Cleaning with standard
solvent-free cleaning agents is permissible.
The clamping unit is closed to a large extent. Make sure that as little
liquid, dust, dirt or other foreign bodies as possible enters the clamping
unit through the outlets for the toothed belts.
Maintenance
- 44 -