FRITSCH ANALYSETTE 3 PRO - Manual (Page 35)

7.4 TorqueMaster
As an alternative to standard clamping devices, the TorqueMaster can be
used for faster and more accurate clamping.
1 TorqueMaster clamping unit with toothed belt
2 Clamping lid
3 Hexagon socket bit (5.5)
4 Cordless screwdriver (with battery and charger)
5 Unclamping aid
NOTICE!
The unclamping aid included is to be used exclusively for
releasing a clamped sieve stack (in case of malfunction of
the cordless screwdriver). The unclamping aid has no
torque limitation, and if it is used for clamping, prevention
of operating errors and possible irreparable damage to the
clamping unit can therefore not be guaranteed.
7.4.1 Fitting the TorqueMaster clamping device
The sieves are fitted as described in Ä Chapter 6.1.1 ‘Fitting and
clamping the sieves’ on page 23. To clamp using the TorqueMaster pro-
ceed as follows:
1.
The starting position of the clamping system is the position at
which both indicators are roughly in the centre of the respective
display range.
This position later ensures that sieve stacks of various heights can
be clamped easily, or that there is sufficient space to release the
system, remove it from the sieve stack and place it behind the
device.
2. Insert the toothed belt in the belt clamping device as described in
Ä Chapter 6.1.1 ‘Fitting and clamping the sieves’ on page 23.
Accessories
- 35 -